MLC
Member
The PINPOINT pH Monitor™ is in use by thousands of customers worldwide. This affordable unit remains the only full-time pH monitor with .01 resolution. The PINPOINT pH Monitor™ requires only a 9-volt battery and is sold complete with probe and calibration fluids. The electrode is also available separately and fits any meter or monitor. Comes complete with meter, probe and all calibration fluids.
- Given proper care, the PINPOINT pH Monitor™ should last a lifetime.
- PINPOINT pH Probe comes with a 10 foot high supression cable and a BNC connector.
- Powered by a standard 9-volt battery (not included).
- Optional AC Adaptor Kit
Specifications
Maintenance: Clean the probe tip frequently (every 3 ~ 4 weeks) using a soft toothbrush. Push the probe tip down into the wet bristles and rotate the probe 3 ~ 4 times. This will clean the inner surfaces of the probe as well as the sensing glass and reference junctions. Most probes will last 12–18 months (continuous duty). They should be replaced once they cannot be calibrated. Check calibration monthly to verify your readings and refer to your owners manual for directions and specification on each monitor/controller.
- PINPOINT pH Probe comes with a 10 foot high supression cable and a BNC connector.
- Powered by a standard 9-volt battery (not included).
Ready stock at Marine Life Center
