Apex Neptune System

[MLC]

Our flagship aquarium controller

Our Apex System is the best-value aquarium controller on the market today. Dollar for dollar you will not find a higher-quality controller that gives you more features, is easier to use, or has a larger and more active user base than the Apex. If you haven’t done so already, please read our Why Apex? page to get a high level view of why the Apex is so important to your aquarium.
The Apex System comes complete with:

• Apex Base Unit
• Energy Bar 8 (or Energy Bar 6 if Intl.)
• Apex Display Module
• Long-life Temperature Probe
• Standard pH Probe

Built-in Internet Connectivity

The Apex Base Unit is Internet-ready straight out of the box. Just plug it into your router and you are good to go – no software to install! This means that you can control your tank from any computer (or mobile device) in the house. There is no need, ever, to connect it directly to a computer to monitor your aquarium or update its firmware. And, once you set up external access via port-forwarding on your router, you can easily access your Apex from anywhere in the world via a web browser or via our iOS or Android apps!

Complete Aquarium Monitoring right out of the box

The Apex Base Unit is equipped with the following monitoring ports:

• • Temperature Port
  • pH Port
  • pH/ORP Port (can be used for either – a feature unique to the Apex)
  • 6 – I/O switch inputs (for use with leak detectors, door switches, feed buttons, ATO, etc.)

LED Dimming and Tunze Pump Control

The Apex Base Unit comes standard with four channels of 0-10V control. These outputs are controlled in the Apex software and are most commonly used for LED dimming or Tunze speed control pumps. By using one of our optionally available cables, you can connect any Apex Ready 0-10V device to these ports. This means you can do cool things like have your LED lights ramp up and down to simulate sunrise and sunset!
They can also be used for various DIY purposes like controlling the dimming level on Meanwell LED drivers. Should you need additional channels of 0-10V control, no problem, simply purchase our VDM module and get four more – and also get a connection for Apex Ready+ LEDs!

 

[MLC]

Display Module

The Apex Display module is a sleek and compact way for your to interact with the Apex Base Unit and control nearly every aspect of your Aquarium.
Mechanical, not membrane keypad

Our Display Module uses high-quality, mechanical buttons. So what you say? Well many devices out there make use of what are called capacitive touch pads. This type of membrane button is just fine for your toaster oven, but in a saltwater environment it is highly susceptible to failure. So, even though the cost to us was higher, we went with mechanical buttons for our Display Module ensuring your product a much longer life.
Adjustable contrast, high-resolution,
backlit graphic display

While some may tout the importance of a color display, we disagree. We believe the most important thing for our customers is ease in readability and size of the display. What good is a color display if it is barely larger than a postage stamp. That is why we went with the backlit graphical display we did. It was the perfect match of function and value for our customers.
Built-In Speaker Plays Multiple Alarm Tones

Inside the Apex Display Module is a tiny speaker with a big heart. This speaker will play one of many alarm sounds and tunes that are built into the Apex. These alarms are perfect to alert you of a water leak, over temp, or whatever you condition you desire to program into the Apex.
Multiple Display Module Capability

With the Apex Display Module you are not limited to having just one control panel. With the Apex (as an option) you can add one, two, even three control panels all to the same Apex. And, these are not watered down, smaller versions of the main control panel, all modules will have the same display and functionality.

 

[MLC]

The Energy Bar

So Much More Than Just a Power Strip!

The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal!
It is obvious that this component is key to controlling things on your aquarium, but what is not so apparent is how it is critical to preventing catastrophe in your aquarium. Here’s how.

Extra AquaBus Connections

Each Energy Bar has additional connectors so that you can easily expand to other modules. This is very helpful for those that want to use one Apex to control multiple aquariums. The Energy Bar becomes an AquaBus “hub” at any location you choose – allowing you to connect more modules in that area. This is called a “star topology” and is unique to the Apex. Many other controllers require you to daisy chain together every module or they require you to buy a separate “hub” to connect everything together.



Probes

The Apex System comes with two probes: Long-life Temperature Probe

Neptune Systems manufactures our own temperature probes in-house. Why? Because we saw the level of early failures due to using off-the-shelf temperature probes like those used in stand-alone digital thermometers as well as those used by other aquarium controllers. These probes often fail because they were never designed to be permanently submersed in saltwater. We custom build our temperature probes using a proprietary method that encapsulates the business end of the probe itself from the corrosive effects of long term saltwater submersion.
Standard Grade pH Probe

We tested many probes until we finally selected an manufacturer that would provide long life as well as consistent and accurate performance. We do not cut corners on the probes we supply. They may cost a little more than the bargain-basement probes you might see out on the open market, but there is a difference.
Other Probes Available

The Apex System can be fitted with two pH probes or one pH Probe and one ORP (Redox) probe. Go to our probes page to read more about what probes are available to add to your Apex System.


Get an Apex System Today!

Pre order open!!!!! Contact us for best offer !!!!!!!!!!

 

[MLC]

Video for Apex....

[video=youtube;l-lqHzOgPog]http://www.youtube.com/watch?feature=player_profilepage&v=l-lqHzOgPog[/video]

[video=youtube;ovFDR3lSYeg]http://www.youtube.com/watch?feature=player_detailpage&v=ovFDR3lSYeg&list=PLTVYio7LWYtPGa9g-pb3xu7umuDUD5joD[/video]

 

[bajak_laut]

cakep2 terus produknya om!

tolong pm pricenya yah.

 

[Reeferee]

Wah mantap banget nih pake controller...PM juga donk harganya pa....

 

[alum]

Wah keren nih... probenya ok punya gak om?
ada cameranyaya lagi... bisa liat kondisi tank via internet...
bisa wireless gak ??

 

[MLC]

Probe ada lab grade. Kalau untuk wireless bisa, hanya tetap harus connect ke router terlebih dahulu..

 

[alum]

mantappp!!
moga cepet masuk nih..

 

[MLC]

Apex system sudah ready stock, silahkan hubungi dan lihat langsung di showroom kami. Kami akan memberikan live demo untuk product ini.


Salam

 

[dhipz]

kalo temperatur probe nya doank ada jual gk pak?kalo ada,coba bisikin harganya pak,hehehe,..

 

[MLC]

Temperatur probe nya saja ada, saat ini blm ready..